Cable and Hose Clamps and Protectors
Hose Clamps
These are the most popular style of hose clamps for general industrial and automotive applications. Stainless steel band and housing with a carbon steel slotted hex head screw.
Package quantity of 10.
Rust-Resistant Hose Clamps
These general purpose all stainless steel hose clamps are equipped with extra resistance to showing corrosion. Magnetic quality keeps rust away, and this gives you a better looking hose clamp for a longer period of time. High strength four-piece housing allows these clamps to exceed all SAE requirements. .
5/16" wide.
Corrosion-Resistant Hose Clamps
These general purpose hose clamps are resistant to corrosion for a longer period of time than the Rust-Resistant variation. They are suitable for most automotive and industrial jobs. High strength four-piece housing allows these clamps to exceed all SAE requirements.
5/16" wide.
Diameter Range (OD) | SAE Number | Part # | Package Quantity | Price |
---|---|---|---|---|
1 7/8" - 5" | 72 | 21A25151 | 5 | $14.90 |
2 5/16" - 3 1/4" | 44 | 21A25154 | 5 | $12.80 |
2 1/2" - 5 1/2" | 80 | 21A25152 | 5 | $15.35 |
2 9/16" - 3 1/2" | 48 | 21A25155 | 5 | $12.80 |
2 13/16" - 3 3/4" | 52 | 21A25153 | 5 | $13.35 |
3 1/16" - 4" | 56 | 21A25156 | 5 | $13.35 |
3 1/8" - 6" | 88 | 21A25157 | 5 | $17.25 |
3 5/16" - 4 1/4" | 60 | 21A25158 | 5 | $13.85 |
3 9/16" - 4 1/2" | 64 | 21A25160 | 5 | $13.85 |
3 5/8" - 6 1/2" | 96 | 21A25159 | 5 | $17.70 |
4 1/8" - 7" | 104 | 21A25161 | 5 | $17.95 |
5 5/8" - 8 1/2" | 128 | 21A25162 | 3 | $16.83 |
7 1/8" - 10" | 152 | 21A25163 | 3 | $18.30 |
9 3/8" - 12 1/4" | 188 | 21A25164 | 3 | $19.83 |
Miniature Hose Clamps
A lightweight, streamlined clamp generally used in small diameter applications such as air & fuel lines. This configuration allows for installation in tight fitting or difficult-to-reach areas. Miniature hose clamps create high sealing pressure with only 10 to 15 inches per pound of installation torque.
5/16" wide. Package quantity of 10.
Soft-Touch Hose Clamps
Use these soft-touch worm-drive hose clamps with soft hoses and tubes. An integral smooth inner liner covers up the fastening slots that can cut into soft hoses. There are no bumps under the housing to jeopardize the concentricity of the seal and no laminated coverings to disintegrate under heat, ultraviolet, or corrosive attacks.
Package quantity of 10.
Soft-Touch Harsh-Environment Worm-Drive Hose Clamps
Use these soft-touch worm-drive hose clamps with soft hoses and tubes. An integral smooth inner liner covers up the fastening slots that can cut into soft hoses. There are no bumps under the housing to jeopardize the concentricity of the seal and no laminated coverings to disintegrate under heat, ultraviolet, or corrosive attacks.
Commonly used in marine and burial applications, the all stainless steel design allows these hose clamps to stand up to tough environments. No steel or spot welds to rust, corrode, or rupture. Meet SAE J1508.
1/2" wide. Package quantity of 10.
Heavy Duty Hose Clamps
Commonly used in marine and burial applications, the all stainless steel design allows these hose clamps to stand up to tough environments. No steel or spot welds to rust, corrode, or rupture.
Package quantity of 10.
Diameter Range (OD) | SAE Number | Width | Part # | Price |
---|---|---|---|---|
1/4" - 5/8" | 4 | 5/16" | 21A16001 | $12.30 |
7/16" - 3/4" | 6 | 5/16" | 21A16002 | $11.60 |
7/16" - 3/4" | 6 | 1/2" | 21A16003 | $16.80 |
1/2" - 7/8" | 8 | 1/2" | 21A16004 | $16.80 |
9/16" - 1 1/16" | 10 | 1/2" | 21A16005 | $17.30 |
11/16" - 1 1/4" | 12 | 1/2" | 21A16006 | $17.50 |
13/16" - 1 1/2" | 16 | 1/2" | 21A16007 | $18.10 |
13/16" - 1 3/4 | 20 | 1/2" | 21A16008 | $18.40 |
1 1/16" - 2" | 24 | 1/2" | 21A16009 | $18.40 |
1 5/16" - 2 1/4" | 28 | 1/2" | 21A16010 | $18.60 |
1 9/16" - 2 1/2" | 32 | 1/2" | 21A16011 | $18.90 |
1 13/16" - 2 3/4" | 36 | 1/2" | 21A16012 | $19.30 |
2 1/16" - 3" | 40 | 1/2" | 21A16013 | $21.30 |
Super Heavy Duty Hose Clamps
Super Heavy Duty is the strongest worm-gear clamp made in the world today. They can withstand more then three times the SAE torque requirements for Type F worm-gear clamps. Eight screw-threads are engaged in the band simultaneously for incredible torquing drive, sealing pressure, and vibration resistance.
5/16" wide.
Super Heavy Duty Liner Hose Clamps
Super Heavy Duty is the strongest worm-gear clamp made in the world today. They can withstand more then three times the SAE torque requirements for Type F worm-gear clamps. Eight screw-threads are engaged in the band simultaneously for incredible torquing drive, sealing pressure, and vibration resistance. Added liner on these hose clamps allow for better hose protection.
5/16" wide.
Diameter Range (OD) | SAE Number | Part # | Package Quantity | Price |
---|---|---|---|---|
1" - 1 3/4" | 28 | 21A25125 | 3 | $15.99 |
1 1/4" - 2 1/8" | 212 | 21A25126 | 3 | $15.99 |
1 3/4" - 2 5/8" | 262 | 21A25127 | 3 | $16.11 |
2 1/4" - 3 1/8" | 312 | 21A25128 | 3 | $16.71 |
2 3/4" - 3 5/8" | 362 | 21A25129 | 3 | $17.07 |
3 1/4" - 4 1/8" | 412 | 21A25130 | 3 | $17.55 |
3 3/4" - 4 5/8" | 462 | 21A25131 | 3 | $17.91 |
4 1/4" - 5 1/8" | 512 | 21A25132 | 3 | $18.66 |
4 3/4" - 5 5/8" | 562 | 21A25133 | 3 | $19.83 |
5 1/4" - 6 1/8" | 612 | 21A25134 | 3 | $20.40 |
5 3/4" - 6 5/8" | 662 | 21A25135 | 3 | $20.55 |
6 1/4" - 7 1/8" | 712 | 21A25136 | 3 | $21.27 |
6 3/4" - 7 5/8" | 762 | 21A25137 | 3 | $22.98 |
7 1/4" - 8 1/8" | 812 | 21A25138 | 1 | $7.84 |
7 3/4" - 8 5/8" | 862 | 21A25139 | 1 | $7.96 |
8 1/4" - 9 1/8" | 912 | 21A25140 | 1 | $8.16 |
Constant Tension Hose Clamps
As fluids run through your hose, thermal expansion and contraction will occur. These hose clamps will adjust right along with it, keeping the same tension on your hose.
An integral smooth inner liner also covers up the fastening slots that can cut into soft hoses. There are no bumps under the housing to jeopardize the concentricity of the seal and no laminated coverings to disintegrate under heat, ultraviolet, or corrosive attacks.
Commonly used in marine and burial applications, the all stainless steel design allows these hose clamps to stand up to tough environments. No steel or spot welds to rust, corrode, or rupture.
Package quantity of 10.
Diameter Range (OD) | SAE Number | Width | Part # | Price |
---|---|---|---|---|
9/16" - 1 1/16" | 10 | 9/16" | 21A19001 | $87.50 |
11/16" - 1 1/4" | 12 | 9/16" | 21A19002 | $90.40 |
3/4" - 1 5/8" | 175 | 5/8" | 21A19004 | $122.10 |
13/16" - 1 1/2" | 16 | 9/16" | 21A19003 | $93.10 |
1 1/4" - 2 1/8" | 212 | 5/8" | 21A19005 | $124.20 |
1 3/4" - 2 5/8" | 262 | 5/8" | 21A19006 | $124.90 |
2 1/4" - 3 1/8" | 312 | 5/8" | 21A19007 | $127.40 |
2 3/4" - 3 5/8" | 362 | 5/8" | 21A19008 | $128.50 |
3 3/4" - 4 5/8" | 462 | 5/8" | 21A19009 | $131.60 |
Constant Torque Small Diameter Hose Clamps
Constant torque hose clamps designed for small diameter applications.
5/16" Package quantity of one.
Diameter Range (OD) | SAE Number | Part # | Price |
---|---|---|---|
1 1/16" - 2" | 24 | 21A25083 | $10.78 |
1 13/16" - 2 3/4" | 36 | 21A25084 | $10.84 |
1 5/16" - 2 1/4" | 28 | 21A25085 | $10.80 |
1 9/16" - 2 1/2" | 32 | 21A25086 | $10.83 |
2 1/16" - 3" | 40 | 21A25087 | $10.94 |
2 5/16" - 3 1/4" | 44 | 21A25089 | $11.02 |
2 9/16" - 3 1/2" | 48 | 21A25090 | $11.10 |
2 13/16" - 3 3/4" | 52 | 21A25088 | $11.19 |
Constant Torque Large Diameter Hose Clamps
Constant torque hose clamps for larger diameter applications.
5/8" wide. Package quantity of one.
T-Bolt Hose Clamps
This heavy duty stainless steel hose clamp is engineered for long term durability with only the highest quality standards.T-Bolt hose clamps are designed for industrial, marine, and vehicle applications. Stainless steel band, plated bolt and nylon insert locknut.
3/4" wide. Package quantity of one.
Constant Tension T-Bolt Hose Clamp
No maintenance required - the large spring allows for greater thermal expansion and contraction than a standard hose clamp. Commonly used in charge air cooling systems, for maintaining tension on hoses that experience high temperature and pressure swings.Made of stainless steel, except hex nut and spring are plated steel.
Firm Hose / Tube products are for use on tougher hoses, while the soft hose clamps are designed for more delicate jobs.
3/4" wide. Package quantity of one.
Heavy Duty Constant Tension T-Bolt Hose Clamps
No maintenance required - the large spring allows for greater thermal expansion and contraction than a standard hose clamp. Heavy Duty is equipped wit larger spring than standard. Commonly used in charge air cooling systems, for maintaining tension on hoses that experience high temperature and pressure swings.Made of stainless steel, except hex nut and spring are plated steel.
1/2" wide. Package quantity of one.
Super Soft Touch Hose Clamps
The embossed design of these hose clamps allows for non-perforated protection against cuts and abrasion. These clamps are equipped with rolled edges to eliminate hose damage while increasing clamping force. Aluzinc material provides three times the protection offered by galvanized steel; stainless steel also available.
Heavy-Load Hose Clamps
These all stainless steel hose clamps are the most widely accepted embossed band worm-gear clamp available in the world. Suited for applications under high mechanical load. Their dynamic asymmetric housing provides optimal sealing forces during tightening. Screw collar guides band tail and allows for ease of assembly. Embossed band, rather than perforated, allows for optimal hose protection.
Nut & Bolt Clamps
Nut is secured to the clamp, making installation easier. The hexagonal head can be tightened with a socket wrench or screw driver. For use with small, thin-walled hoses. Plated steel designed for automotive fuel injection hoses.
Package quantity of 20.
Pipe Clamps
Clamps designed for usage on pipes. V-Band clamp features high strength and positive sealing integrity. Applications include heavy duty diesel engine exhaust and turbochargers.
Package quantity of one.
Kits
Kits with materials needed to build hose clamps: any size for any job. These kits include various amounts of bands, splices, and fasteners in various sizes.
Drivers
Flexible screwdriver makes installation easy and secure. The sturdy, flexible shaft allows a 90 degree angle. 7mm hexagonal screw head fits all ABA hose clamps.
Racks
Storage racks for keeping hose clamps together and organized.
Name | Part # | Price |
---|---|---|
6210 Clamp Assortment Rack | 66C11001 | $178.50 |
Hose Spacers
Simplify the routing and prevent damage to your hose lines. Simply cable tie your two lines into place in this block. Color is black. Sold individually.